Luna Cycle · Mid-drive · United States
Luna BBSHD kit
Maker list
Motor only. Battery is separate. Charger is separate. 28 mph.
US-shop BBSHD kit aimed at riders building toward a Class 3 pedal-assist speed, with programming left to the buyer.
- Continuous
- 750 W
- Class
- 28 mph
- Energy
- No pack
- Shell
- BSA 68–73 mm

01
Mid-drive
Power at the bottom bracket
- Continuous
- 750 W
- Peak
- Set with the build
- Torque
- 160 Nm
- Mass
- On the card
Luna BBSHD kit bolts into the frame and drives the chainring. Continuous rated power is 750 W. Claimed peak is Set with the build. Torque at the crank is 160 Nm. BBSHD 160 Nm class.
Read the build notes
Because the motor uses the bicycle’s gears, the same 750 W feels different in a low gear on a climb and in a high gear on the flat. That is the point of a mid-drive.
02
Bottom bracket
BSA 68–73 mm
- Shell
- BSA 68–73 mm
- Tools
- BB removal, lockring
- Chainline
- Set by the ring
- Install
- Workshop
The shell is the fit. Luna BBSHD kit needs BSA 68–73 mm. The existing bottom bracket comes out. The motor spindle takes its place, and the lockring sets the chainline.
Read the build notes
A press-fit shell, a different width, or a carbon shell with an insert is not this configuration. The workshop measures the shell before the motor is unboxed.
03
Chainring
The ring is part of the motor
- Ring
- Included size
- Lockring
- Included
- Chain
- Existing, if the line is right
- Gears
- The bike’s
The chainring ships with Luna BBSHD kit. Its size is the one in the manual. A smaller ring for steeper hills is a different setup, not a silent swap.
Read the build notes
Chain, cassette and derailleur stay with the bike if the chainline lands. Luna Cycle includes the ring and the lockring so the motor and the drivetrain meet at a known offset.
04
Cranks
Arms, bolts, sensor
- Sensor
- Cadence
- Pedals
- Yours
- Cut-off
- 28 mph
- Throttle
- Not fitted
Crank arms bolt to the spindle of Luna BBSHD kit. The sensor is cadence, so the motor sees how the cranks are being turned, not only whether they are turning.
Read the build notes
Pedals are the rider’s own. The motor does not replace them. Assistance follows the pedal input up to 28 mph.
05
Battery
Pack named for this motor
- Model
- Not in this offer
- Energy
- Matched when the pack is named
- Voltage
- 52 V
- Chemistry
- Stated on the pack sheet
Luna BBSHD kit does not include a battery in the surviving offer. The voltage class is 52 V. An allowance of Maker list sits in the cost band until a model is named.
Read the build notes
A pack from a newer generation is not assumed to talk to this motor. The pack has to be the one the manual names.
06
Charger
the charger paired to Luna BBSHD kit
- Model
- With the pack
- Included
- No
- Pack
- Named pair
- Warranty
- Maker warranty. Term is on the invoice.
Charger is separate. Budget Maker list once the pack model is fixed. Luna BBSHD kit does not ship with a charger in this offer.
Read the build notes
Leave the pack on its own charger. A higher-voltage brick with the same plug is the wrong part.
07
Display
Bar unit for this generation
- Controller
- Included controller
- Reads
- Assist, speed, charge
- Mount
- Handlebar
- Generation
- Catalogue
The display is paired to the controller in Luna BBSHD kit: Included controller. It shows assist level, speed and the state of charge for the 52 V pack for Luna BBSHD kit.
Read the build notes
A display from another generation is not a spare. Buttons, connector and the firmware family belong to this motor.
08
Chainline
The frame has to agree
- Formats
- mountain, hybrid, cargo
- Uses
- hills, commuting
- Path
- Workshop
- Offer
- Maker list
Mid-drives fail quietly when the chainline is wrong: the chain climbs the cassette, the stay rubs, the clutch chatters. Luna BBSHD kit is checked on the bike, not on a bench photo.
Read the build notes
A workshop install is the path on file. The quote covers the motor fit. Bent hangers, worn cassettes and brake work are extra.
Install
Order of work
Workshop install, in this order.
- 01Measure the shell. Luna BBSHD kit needs BSA 68–73 mm.
- 02Remove the bottom bracket, hang the motor, and set the lockring.
- 03Fit the included chainring and check the chainline against the cassette.
- 04Mount the named pack and connect its charger only as a matched pair.
- 05Route the loom along the down tube. Fit the display. Set the sensor.
- 06Torque the crank bolts. Ride the stand. Confirm the cut-off and the gears.
In depth
Read Luna BBSHD kit before you book it.
Mid-drive · 28 mph · United States. The numbers below are the ones on this configuration, not the family in general.
The offer
What Luna BBSHD kit actually is
Luna BBSHD kit is one configuration from Luna Cycle, made in United States, filed here as a mid-drive. The family is BBSHD, generation Catalogue. US-shop BBSHD kit aimed at riders building toward a Class 3 pedal-assist speed, with programming left to the buyer.
In the box, as this record has it: BBSHD, Display, Hardware. Still required before the bike moves under its own assist: Battery, Controller tune for the state you ride in. A cheaper advert for the same family name is not this list. If the battery, the charger or the throttle differs, it is a different configuration and it gets a different page.
US Class 3 is pedal-assist to 28 mph. Watt limits are state law, often 750 W. This record uses 750 W as the street-facing figure, not the motor’s peak.
The price on the card is the maker’s published figure in USD, or Maker list when no figure was published. Allowances for a missing pack, a charger and workshop time sit in the complete-cost band. They are not a second product and they are not a promise that a random pack will talk to this controller.
The bicycle
The frame this motor is asking for
Luna Cycle lists Luna BBSHD kit against Mountain, Hybrid, Cargo bicycles, for Hills, Commuting. Wheel sizes on the card: 700c, 26, 27.5. The mechanical interface is BSA 68–73 mm. Brakes are disc.
A mid-drive takes the bottom bracket’s job. The shell width, the thread or the press-fit standard, and the chainstay clearance decide it. The bike’s own gears then multiply whatever the motor puts into the chainring, which is why a modest continuous rating can still climb if the shell is the right one.
Pedals stay. This configuration is a bicycle with assistance, not a motorcycle conversion. Sensor on the card: cadence. Cut-off on the card: 28 mph. Throttle: not fitted.
The numbers
750 W is not the whole story
Continuous rated power for Luna BBSHD kit is 750 W. Claimed peak is not stated separately from the continuous rating. Torque is 160 Nm. BBSHD 160 Nm class. Motor mass is not published. System mass, once the named parts are on the bike, is BBSHD, Display, Hardware.
Peak is a short claim. Street rules, including the Great Britain check on this site, use continuous rated power and the speed at which assistance stops. A controller that can be unlocked does not change the record of the motor as sold. Luna BBSHD kit is filed in the 28 mph class: United States Class 3 pedal-assist.
Riding 28 mph hardware on a road is a question for the country you are in. The Great Britain checker will not award a 250 W, 15.5 mph pass to a faster configuration.
Pack and charger
The motor is not a finished electrical system
Luna BBSHD kit is sold as a motor. Voltage class is 52 V. Energy in this offer: no watt-hour figure in this offer. No battery model is invented to fill the gap. The complete-cost band holds an allowance so a finished bike can be budgeted without pretending a pack was included.
The charger follows the pack, not the motor slogan. Budget the charger once the pack model is fixed. Similar voltage, a connector that happens to fit, or the word universal is not a match. The controller in Included controller expects the pack the manual names.
If you already own a pack, the workshop question is the continuous discharge rate, the connector pinout and whether the battery management system will talk to this controller. Those three are not on a watt sticker.
Mid-drive
How Luna Cycle uses this layout
Mid-drive. Luna BBSHD kit sits at the bottom bracket and drives a chainring, so the bicycle’s gears become the motor’s gears. Climbing in a low gear is the point. Spinning a tiny ring on the flat, at the motor’s expense, is how chains and cassettes die early.
The shell on this record is BSA 68–73 mm. Press-fit, a worn cartridge, or a carbon shell with a hopeful adapter is a workshop measurement, not a yes from the listing. Chainline is the quiet failure: the chain climbs, the stay rubs, the clutch chatters.
Cadence sensing means the motor comes in when the crank is turning and the assist level says so. It can feel like a switch. Programming the ramp is part of living with it, and a hotter programme is a different legal object from the one on this page.
The workshop
A workshop path, written as a sequence
Luna BBSHD kit is a workshop install in this record. Doing it yourself does not rewrite the path into a pass. It means the documented route was not the one you took, and the result stays conditional until someone competent has seen the bike.
Warranty as published: Maker warranty. Term is on the invoice.. Labour in the cost band is separate from the offer. A brake service the bike already needed, a new chain, or a hanger alignment is not folded into Luna Cycle’s price to make the total look neat.
The sensible order is measure, then mount, then connect, then the first assisted roll in the stand. Connectors are keyed for a reason. The torque arm, the axle nuts and the connector boots are one inspection at the end, not three trips.
After it is on
The first month, and the parts that wear
Chains and cassettes wear faster because the motor can hold a high torque in a small gear. Shift before the load spikes. A worn cassette is a workshop line, not a reason to suspect the motor first. Keep the chainring that shipped with the kit until you have a reason, in writing, to change the ratio.
Keep the named charger with the pack you actually fitted. Store the pack cool, part-charged if it will sit, and not in a hallway that is your only exit. Luna Cycle’s display, if one is included, is paired to this controller generation. A screen from the next family is not a spare.
My Garage on this device can hold the configuration, who fitted it, and what was still open. That note is for you and for the next workshop. It is not a certificate. If a later notice lands on this configuration, the record is where it should show.
Read next to it
From the library
- What a conversion kit actually includesA motor wheel and a complete system are not the same product. The page should say which one you are looking at.
- Watts, torque, and the sticker that does not mean rangeContinuous watts, peak watts and newton-metres describe different moments. Mixing them is how a listing looks twice as strong as the motor you will live with.
- Speed classes, from 25 km/h to off-roadThe class is a property of the kit as sold. The road you may use it on is a property of the country, and sometimes of the state or the canton.
- Bottom brackets: 68, 73, and the shells that are not BSAA mid-drive does not sit beside the bracket. It becomes the bracket. Width and thread are the fit.
- Cadence sensing and torque sensingOne motor notices that you are turning the pedals. The other notices how hard. The ride, the wiring and the price all change with that choice.
- Cargo bikes and longtailsThe motor is the easy part. The chain, the brakes and the length of the frame are the job.
Specification
Published figures for this configuration.
- Drive
- Mid-driveDocument reviewed
- Sensor
- cadenceManufacturer stated
- Continuous rated power
- 750 WManufacturer stated
- Claimed peak power
- UnknownNot verified
Not used as the continuous rating.
- Nominal voltage
- 52 VManufacturer stated
- Torque
- 160 NmManufacturer stated
BBSHD 160 Nm class.
- Motor weight
- UnknownNot verified
BBSHD, Display, Hardware
- System weight
- UnknownNot verified
BBSHD, Display, Hardware
- Controller
- Included controllerDocument reviewed
- Wheel sizes
- 700c, 26, 27.5Document reviewed
- Axle
- Not a hub axleDocument reviewed
- Brakes
- DiscDocument reviewed
- Bottom bracket
- BSA 68–73 mmDocument reviewed
- Assistance cut-off
- 28 mphDocument reviewed
- Throttle in this configuration
- NoDocument reviewed
- Warranty
- Maker warranty. Term is on the invoice.Manufacturer stated
Complete cost
Uncertain lines stay labelled. Shipping and import charges are not estimated.
| Kit offer | Maker list | Listed price |
|---|---|---|
| Battery | Maker list | Priced as its own line |
| Charger | Maker list | Allowance only. |
| Required accessories | Maker list | Allowance |
| Installation | Maker list–Maker list | Workshop band |
| Shipping | Not estimated | Ask the seller |
Estimated complete Maker list–Maker list
Nominal energy
Unknown. Not inferred from voltage alone.
Range sketch
Add a named pack before a distance is drawn.
Included
- BBSHD
- Display
- Hardware
Required as well
- Battery
- Controller tune for the state you ride in
Battery and charger
- Battery model
- UnknownNot verified
- Charger model
- UnknownNot verified
- Chemistry
- UnknownNot verified
- Capacity
- UnknownNot verified
US Class 3 is pedal-assist to 28 mph. Watt limits are state law, often 750 W. This record uses 750 W as the street-facing figure, not the motor’s peak.
Seller offers
Published offers in Great Britain.
Luna Cycle
Maker list
United States · BBSHD. Display. Hardware
List price not published in the source used. Ask the maker.
Source documents
- Published specificationManufacturer stated
Luna Cycle sells Bafang BBSHD kits to the US conversion market.
Change history
- 17 Oct 2026
Entered from a published maker or press specification.